Introduction
India has one of the most stringent quality control regulations to ensure the safety, reliability, and efficiency of products across various industries. The Bureau of Indian Standards (BIS) is the apex body responsible for developing and enforcing Indian Standards (IS), ensuring compliance with national and international benchmarks.
For both domestic and foreign manufacturers, compliance with BIS regulations is mandatory to sell products in India. One of the key regulations under BIS is the Quality Control Order (QCO) on Steel, which is enforced through the Steel and Steel Products (Quality Control) Order, 2024.
However, obtaining a BIS licence can be a complex and time-consuming process, especially for foreign manufacturers. This is where Omega QMS Pvt Ltd plays a critical role in facilitating BIS licencing and ensuring smooth compliance.
Understanding Indian Standards (IS)
Indian Standards (IS) are a set of specifications developed and maintained by the Bureau of Indian Standards (BIS) under the Ministry of Consumer Affairs, Food & Public Distribution, Government of India. These standards regulate quality, safety, and performance of products across various sectors.
Objectives of Indian Standards
- Ensuring Quality and Safety– Protect consumers by ensuring high-quality and reliable products.
- Facilitating Trade– Enable Indian and foreign manufacturers to compete in domestic and global markets.
- Regulating Manufacturing Practices– Standardize production processes to enhance industry efficiency.
Bureau of Indian Standards (BIS) and Its Role
The BIS is India’s national standards body responsible for:
- Developing and enforcing standards for products and services.
- Certifying products under the ISI mark for quality assurance.
- Conducting product testing and compliance verification.
- Setting benchmarks for imports and exports to maintain trade consistency.
One of the most critical BIS regulations is the Steel and Steel Products (Quality Control) Order, 2024, which mandates strict quality control measures for steel products in India.
Quality Control Order (QCO) on Steel
The Quality Control Order (QCO) on Steel is a crucial regulatory measure issued by the Ministry of Steel to ensure that all steel products comply with Indian Standards (IS) and meet BIS certification requirements. The order aims to eliminate substandard imports, enhance consumer safety, and improve manufacturing standards in the steel sector.
Key Features of the Steel and Steel Products (Quality Control) Order, 2024
- Mandatory BIS Licencing for Steel Products
- All manufacturers, including foreign exporters, must obtain a BIS licence before selling steel products in India.
- Steel products must bear the ISI mark to indicate compliance.
- Product Categories Covered Under the QCO
- Steel wires, rods, and bars
- Steel sheets, plates, and strips
- Galvanized and coated steel products
- Structural steel and reinforcing bars
- Stainless steel products
- Quality Control Measures
- Strict product testing and certification through BIS-accredited labs.
- Each batch of steel must include a test certificate from a BIS-certified manufacturer.
- Substandard steel products cannot be sold and must be disposed of as per BIS guidelines.
- Penalties for Non-Compliance
- Violations can lead to penalties under the BIS Act, 2016.
- Substandard products can be confiscated, and manufacturers may lose their BIS licence.
Comprehensive List of Indian Standards for Steel and Steel Products
The following Indian Standards (IS) apply to steel and steel-related products under the QCO on Steel:
- Steel Wires and Rods
- IS 1785 (Part 1 & 2):High-tensile steel wires for pre-stressed concrete.
- IS 6003:Indented steel wires for pre-stressed concrete.
- IS 432 (Part 1 & 2):Mild and medium tensile steel bars for concrete reinforcement.
- IS 13620:Fusion-bonded epoxy-coated reinforcing bars.
- IS 14268:Low-relaxation pre-stressed steel strands.
- IS 7887:Mild steel wire rods for general engineering purposes.
- IS 7904:High-carbon steel wire rods.
- IS 280:Mild steel wires for general engineering applications.
- Steel Sheets, Plates, and Strips
- IS 277:Galvanized steel sheets (plain and corrugated).
- IS 6006:Uncoated stress-relieved strands for pre-stressed concrete.
- IS 2062:Hot rolled medium and high-tensile structural steel.
- IS 2002:Steel plates for pressure vessels.
- IS 2041:Steel plates for low and moderate temperature pressure vessels.
- Stainless Steel Products
- IS 6911:Stainless steel sheets, strips, and plates.
- IS 5522:Stainless steel sheets for utensils.
- IS 15997:Low-nickel stainless steel for kitchen applications.
- Structural and Industrial Steel
- IS 2062:Hot rolled structural steel.
- IS 2831:Carbon steel cast billets and blooms for re-rolling.
- IS 11587:Weather-resistant structural steel.
- Steel Tubes and Pipes
- IS 10748:Hot rolled steel strip for welded tubes and pipes.
- IS 11513:Hot rolled carbon steel strip for cold rolling.
- Special Purpose Steel
- IS 1387:General requirements for the supply of metallurgical materials.
- IS 1870:Comparison of Indian and overseas steel standards.
Role of Omega QMS Pvt Ltd in Facilitating BIS Licencing for Foreign Manufacturers
For foreign manufacturers, compliance with BIS regulations and QCO on Steel is crucial for market entry in India. Omega QMS Pvt Ltd provides specialized consultancy and licencing support to simplify the process.
Key Services Offered
- Regulatory Consultation
- Helps foreign manufacturers understand BIS licencing schemes.
- Provides guidance on product-specific Indian Standards.
- Documentation Assistance
- Ensures that all necessary documents are prepared and submitted
- Minimizes delays by ensuring compliance with BIS guidelines.
- Product Testing Coordination
- Arranges testing in BIS-accredited laboratories.
- Ensures that test reports comply with QCO on Steel requirements.
- Factory Inspection and Audit Support
- Prepares manufacturers for BIS factory audits.
- Conducts mock audits to identify and correct compliance gaps.
- Application Filing and Approval Management
- Manages the entire BIS licencing application.
- Follows up with BIS authorities to resolve any certification queries.
By ensuring compliance with Indian Standards, Omega QMS helps foreign manufacturers obtain BIS licencing efficiently, avoiding regulatory hurdles and enabling smooth market access.
Conclusion
For foreign manufacturers, obtaining BIS certification under the QCO on Steel is a mandatory requirement for entering the Indian market. However, navigating India’s complex regulatory framework can be challenging.
Omega QMS Pvt Ltd plays a crucial role in simplifying the BIS licencing process, ensuring smooth market entry while maintaining compliance and product quality.
OMEGA QMS PVT. LTD.
908-909, Hemkunt House, Rajendra Place, New Delhi-110008, India
Phone: 011-41413939(100 lines), Email: info@globalomega.com,
sales@globalomega.com, mktg@globalomega.com